Panasonic S-ics Technical Manual page 251

Section 700 - Operation
Operation
To assign PSD numbers:
1. Lift the handset or press the ON/OFF key.
2. Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To dial a PSD number by entering the speed dial bin number:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the MEMORY key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
To delete a PSD number:
1. Lift the handset or press the ON/OFF key.
2. Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• Storing a new number erases any previously stored data.
S-ICX-64-700
Action
Action
Action
S-ICX (International) issued April 2002
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Intercom dial tone
Outside dial tone
Result
Intercom dial tone
251