Table of Contents
Advertisement
Chapter 1. System Programming (FF1)
Conference Call Enhancement
The Conference Call feature has been enhanced to provide conferencing for up to 4 parties without the
CONF/8 card, and to provide more status information while setting up and participating in the conference
call.
Caller ID Enhancement #1/Caller ID Logging Display
Caller ID information on the Caller ID log display is shown in the order of calls received, with the most
recent call at the top.
In Version 5.0 and previous, the oldest call was shown at the top of the display.
Caller ID Enhancement #2/Caller ID Logging Display (HK only)
When a call is received from an analog trunk, the caller name and the time is displayed in the Call Logging
Data screen.
In Version 5.0 and previous, only the Caller ID and time were displayed.
From Version 6.0, the Call Logging Data delete feature is added.
* Call Name Service is subject to the local network service.
Caller ID Enhancement #3/Caller ID Logging Display
Beginning with Version 6.0, the Caller ID key flashes when Caller ID information is received during an
incoming call.
Call Duration Display
When number keys are pressed during a call, the call duration timer disappears to show the keys pressed, but
reappears after a specified amount of time.
Reversion Display
When a call is reverted to a busy extension, the receiving telephone display shows that a reversion call has
been received.
SMDR Enhancement #1: Caller Name Print on SMDR (HK only)
Calls originating on an ISDN line, the caller name is shown on the SMDR.
* Call Name Service is subject to the local network service.
SMDR Enhancement #2: ISDN B-channel number pint on SMDR
Calls originating on an ISDN line, the B-channel number is shown on the SMDR.
312
S-ICX (International) issued April 2002
Section 700 - Operation
S-ICX-64-700
Advertisement
Table of Contents
