Table of Contents
Advertisement
Chapter 5. Key Telephone Features
3. Enter the OHVA feature access code (default = 8).
4. Make your announcement
To answer an OHVA:
1. Press the OHVA Split key.
Note: You must program an FF key as a split key (default =
*71) to use this feature.
2. To return to the previous call, press the Split key again.
To transfer a call using OHVA:
1. Press the HOLD key to put the current call on hold.
2. Dial the extension number to which the call is being trans-
ferred.
3. Enter OHVA feature access code (default = 8) and announce
the call to be transferred.
4. If transfer is:
• Not accepted, retrieve the call by pressing the associ-
ated flashing MCO key (if an appearing call) or by
pressing the HOLD key (if a non appearing call).
• Accepted, and On-hook Transfer is enabled for your
extension, replace the handset or press the ON/OFF
key.
If On-hook Transfer is not enabled for your extension,
press the PROG key (or RELEASE key if using DSS/
72).
To reply to off-hook voice announcement with a text message:
1. Press the MSG FF key.
2. Enter the Reply Text Message number (1-9, 0). See Table 19
on page 177 for the text message replies.)
178
Action
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
• OHVA EXT XXX displays if busy
extension called (where XXX = calling
extension.
• INT LED flashes
Result
Split key flashes red
The OHVA originating party receives
Busy signal.
Result
Current call on hold
Busy signal
Result
The text message reply appears on the
camped on telephone display.
S-ICX-64-700
Advertisement
Table of Contents
