Walking Trs (Call Barring) Class Of Service - Panasonic S-ics Technical Manual

Table of Contents

Advertisement

Chapter 5. Key Telephone Features

Walking TRS (Call Barring) Class of Service

Walking Toll Restriction Service (TRS) (Call Barring) Class of Service (COS) allows an extension
user to "carry" his or her toll restrictions to another phone.
Before the Walking TRS (Call Barring) COS feature can be used, a Walking COS code must be
entered at your extension before using dialling privileges at another extension.
Operation
To use a Walking TRS (Call Barring) COS code:
1. Lift the handset or press the ON/OFF key of an extension
other than your own.
2. Enter the Walking TRS (Call Barring) access feature code
(default = 87).
3. Dial your extension number.
4. Enter your Walking COS code (0001-9999)
5. Enter an exchange line access code (default = 9 or 81-84)
6. Dial the phone number.
7. Replace the handset or press the ON/OFF key.
Hardware Requirements
N/A
Considerations
The same Walking TRS (Call Barring) COS code can be used on more than one extension.
Walking TRS (Call Barring) COS mode is kept until the user goes on-hook.
ARS and TRS (Call Barring) dialling privileges follow the Walking TRS (Call Barring) COS.
Before entering a new Walking TRS (Call Barring) COS code, you must first clear the existing
code.
When Walking TRS (Call Barring) COS is used, Wxxxx (where xxxx is the user's extension
number) appears in Call Logging.
210
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Walking TRS (Call Barring) COS
remains in effect until you replace the
handset.
S-ICX-64-700

Advertisement

Table of Contents
loading

Table of Contents