Call Park - Panasonic S-ics Technical Manual

Chapter 6. DSLT Features
Hardware Requirements
• N/A
Considerations
• N/A

Call Park

You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
Trunk, extension, and network calls may be parked.
There are two ways for an extension to park a call on the ICX. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialling the park answer
code plus the parking extension number. The other way is to park the call at another extension and
dial the park transfer answer code at the other extension to retrieve the call. Beginning with Version
5.0, an Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-
appearing calls), a Hold Recall, and a Station Park Recall.
Operation
To park a call on this extension:
1. While on a call, press the HOLD key.
2. Enter the Call Park Hold access code (default = 771).
3. If necessary, page the party that needs to retrieve the call.
To retrieve a call parked at the originating extension from another extension:
1. Lift the handset or press the ON/OFF key.
Enter the Call Park Answer/Other Ext. access code (default
= 773).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default = *9).
2. Dial the number of the extension that parked the call.
To park a call at another extension:
1. Press the HOLD key.
2. Enter the Call Park Transfer access code (default = 774).
230
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
• Current call on hold
Result
Intercom dial tone
• Connected to parked call
Result
• Current call on hold
S-ICX-64-700