Table of Contents
Advertisement
Chapter 4. User Maintenance
7. Enter the start date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FL/R
key.
8. Press the HOLD key.
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FL/R key.
10. Press the HOLD key.
11. To set additional Exception Day modes, press the volume
up or down key or press the HOLD key to move to the
desired mode.
12. Repeat steps 7-11 until all Exception Day modes are set.
(Up to 6 exception periods may be specified.)
Note: The entry positions are listed in Table 11 on page 88.
13. Press the MEMORY key to exit the entry mode.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Table 11.
Exception Days
EXCEPTION DAYS:
200=Start - Exception Day 1
201=End - "
202=Start - Exception Day 2
203=End - "
204=Start - Exception Day 3
205=End - "
206=Start - Exception Day 4
207=End - "
208=Start - Exception Day 5
209=End - "
210=Start - Exception Day 6
211=End - "
Hardware Requirements
•
N/A
88
Action
8107-2
(200-211)
Hold
"
"
"
"
"
"
S-ICX (International) issued April 2002
Section 700 - Operation
Result
201
:MMDD
PTN 1 Stop Day displays
Next Exception Day mode displays
Desired Exception Day mode displays
2-
Mode Except Day displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
(MMDD)
Hold
Month/Day of Exception Days
(Start or End)
S-ICX-64-700
Advertisement
Table of Contents
