System Hold - Panasonic S-ics Technical Manual

Table of Contents

Advertisement

Section 700 - Operation
Station Call Park

System Hold

You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
1. While on a call, press the HOLD key.
To retrieve a call placed on System Hold from the extension that placed it there:
1. Press the line key that is flashing green or press the HOLD
key if a non-appearing trunk call.
To retrieve a call placed on System Hold from an extension other than the one that put
it there:
1. Press the line key that is flashing red.
To retrieve a held call on a specific exchange line:
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Exchange Line Answer code (default =
*0).
3. Enter the exchange line number.
Hardware Requirements
N/A
Considerations
N/A
S-ICX-64-700
Action
Action
Action
Action
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
Result
CO XXX displays (where XXX = outside
line number)
Result
CO XXX displays (where XXX = outside
line number)
Result
Intercom dial tone
Enter TRK # displays
133

Advertisement

Table of Contents
loading

Table of Contents