Broker's Hold; Call Park - Panasonic S-ics Technical Manual

Section 700 - Operation
Considerations
• Intercom calls will be held as Exclusive.

Broker's Hold

Broker's Hold allows you to toggle between the current call and the last held call by hookflash.
Operation
To place a call on Broker's Hold:
1. Pick up the first call.
2. Hookflash.
3. Pick up the second call.
4. Hookflash.
Hardware Requirements
• N/A
Considerations
• If Broker's Hold is enabled, it is not possible to establish a conference call from an SLT position.

Call Park

You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
Trunk, extension, and network calls may be parked.
There are two ways for an extension to park a call on the ICX. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialling the park answer
code plus the parking extension number. The other way is to park the call at another extension and
dial the park transfer answer code at the other extension to retrieve the call. Beginning with Version
5.0, an Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-
appearing calls), a Hold Recall, and a Station Park Recall.
Operation
To park a call on this extension:
1. While on a call, press the hookswitch.
2. Enter the Call Park Hold access code (default = 771).
3. If necessary, page the party that needs to retrieve the call.
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 7. SLT Features
Result
First call on hold
Second call on hold, first call retrieved
Result
• Intercom dial tone
277