Panasonic S-ics Technical Manual page 94

Chapter 4. User Maintenance
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key.
9. Enter the PSD bin number (80-99).
10. Press the HOLD key.
11. Enter the PSD name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
95.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 96.)
Note: Press the FL/R key to clear any existing data.
12. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 95.
• See Example 2. Small-Display Phone on page 96.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
13. Repeat steps 11-12 as many times as necessary to enter the
desired speed dial name.
Note: Press the FL/R key to clear the entire entry.
14. Press the HOLD key to store the entry.
15. To set additional PSD names, press the volume up and
down key or press the HOLD key to move to the desired
PSD.
16. Repeat steps 11-15 until all PSD names are entered.
17. Press the MEMORY key to exit the PSD name entry mode.
18. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
94
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
1 :
PSD Name displays
EXT Number displays
Enter PSD # XXX displays (where
XXX = dialled extension number)
A B C D E F PXX displays (where
PXX = PSD number)
Next PSD bin number displays
Desired PSD bin number displays
Enter PSD # XXX displays (where
XXX = extension number)
81-
User MAINT displays
OR...
ON/OFF LED goes off
S-ICX-64-700