Panasonic S-ics Technical Manual page 174

Chapter 5. Key Telephone Features
3. While the phone is still ringing, or when you hear the busy
tone, enter the Message Wait Set code (default = 4).
4. Replace the handset or press the ON/OFF key.
To answer a message waiting indication (callback):
1. Lift the handset or press the ON/OFF key.
2. Enter the Message Wait Callback code (default = *6) or
press the MSG FF key if using a large-display phone.
OR...
Press the Flexible Function (FF) Key assigned as a Message
Callback Key (Version 4.5 and higher).
To cancel a callback message:
1. Lift the handset or press the ON/OFF key.
2. Enter the Callback Request Cancel code (default = *5) or
press the MSG FF key if using a large-display phone.
3. Replace the handset or press the ON/OFF key.
Note: Message waiting/callback messages may also be cancelled by either the originator or the
receiver by calling the other party.
Hardware Requirements
• N/A
Considerations
• The System has priority message waiting for 3rd-party Voice Mail. See "Voice Mail" on page 71.
174
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
MSG Accepted displays
• Message lamp flashes at called exten-
sion
• MSG EXT XXX displays (where XXX
= calling extension number) or name
of calling extension displays at called
extension
Result
Intercom dial tone
• Telephone automatically dials exten-
sion that sent the message waiting indi-
cation
• Message lamp goes off when your call
is answered
Result
Intercom dial tone
MSG Cleared displays
Message lamp goes off
S-ICX-64-700