Call Forwarding - No Answer - Panasonic S-ics Technical Manual

Section 700 - Operation

Call Forwarding - No Answer

When Call Forwarding - No Answer is set, a call will ring until the Call Forward - No Answer timer
expires. When the timer expires, the unanswered call is forwarded.
Operation
To set Call Forwarding - No Answer:
1. Lift the handset or press the ON/OFF key.
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 723.
• For another extension, enter 743.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Dial the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For informa-
tion, see "Speed Dialling" on page 187.)
5. Replace the handset or press the ON/OFF key.
To cancel Call Forwarding - No Answer:
1. Lift the handset or press the ON/OFF key.
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 733.
• For another extension, enter 753.
3. If cancelling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset or press the ON/OFF key.
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Result
Intercom dial tone
131