PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3.7 Head cleaning before printing
p.3-41: Modify the procedures after step 8 as follows:
8. Put the purge plate down from the purge stand.
9. Using the attached print head wiper, lightly wipe off the ink accumulated on the print
head. Wipe from the back of the product toward yourself.
CAUTION
When cleaning the print head, be careful of the following. Incorrect cleaning may result in
clogging of the nozzles.
Do not touch the print head surface with bare hands.
Wipe out ink on the print head wiper every time when ink is adhered to it.
NOTE
NOTE
All print head surfaces must be wiped off even after purging 1 color only.
Otherwise, ink may drip from the print head at which purging was not performed.
PJ16E-A-00d
No.
Purge stand
1
Purge plate
2
No.
Print head
1
Print head wiper
2
Name
1
Name
22
ERRATA
2
April 2002
MUTOH INDUSTRIES LTD.