6 Troubleshooting
6.3 Error messages
This chapter explains the messages displayed on the operation panel both when the printer works
normally and when an error occurs, and the solutions for the errors.
6.3.1 Status messages
The following are the status messages while the printer works normally.
(1) Displays the operational status (1)
The following operational status is displayed on the first line on the operation panel.
No.
Display
1
Ready to plot
2
Paper End
3
Receiving
4
Converting
5
Plotting
6
Warning WasteInkTank
7
Warning InkTube Life
(2) Displays of the operational status (2)
The following operational status is displayed between the first and the third line on the operation panel.
No.
Display
1
Ink Refil
Wait for a while
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Solutions
Waiting for the next operation. (The media is
loaded.)
The printer is waiting for the next operation.
(No media is loaded into the printer.)
The printer is receiving data.
The printer is converting data.
The printer is printing.
Replace the waste liquid absorption material
in the tank.
Contact the dealer where you bought the
printer or MUTOH's technical support center.
Solutions
The printer performs ink charging. Wait for a
while.
6-8
References
-
3.6 Media
handling
-
-
-
4.6.2 Disposal of
waste fluids
-
References
3.5 Refilling the
ink - jet wash fluid