Table of Contents
Advertisement
3 Basic Installation
3.5 Refilling the ink - jet wash fluid
The refilling of the ink and jet wash fluids are described below.
WARNING
• • • •
The ink used in this product contains an organic solvent (CYCLOHEXANONE).
Make sure to follow the industrial waste disposal laws and ordinances of your
local governments.
It is necessary to install a local ventilation unit, push/pull type ventilation unit,
or a total ventilation unit to perform adequate ventilation.
• • • •
If ink or jet wash liquid is swallowed, do not make the person throw up, but
immediately call a doctor and a poison management center.
If there is contact in eyes or inhalation, it may cause poisoning. Follow the
cautions and procedures labeled on the ink and jet wash bottles, and take
action immediately.
• • • •
The ink used in the product contains an organic solvent (CYCLOHEXANONE).
It is flammable so open flame is prohibited in the area. In a dry environment,
static electricity can cause ignition, so before handling the ink, jet wash liquid
or waste liquids, touch a metallic object first to remove static electricity from
your body. Do not near materials having static, and take appropriate measures
against static electricity.
CAUTION
• • • •
When refilling ink or jet wash fluid, always wear the protective gloves supplied
with the unit.
• • • •
The ink and jet wash liquid are poisonous. If skin contact occurs, wash with
soap water and rinse well.
NOTE
•
When filling the ink, use only MUTOH recommended.
This printer is adjusted under the condition of using only the recommended ink.
• Using other types of ink may cause faded printing or the ink can not be properly detected.
• Problems caused by using ink other than the recommended will void the warranty.
•
Refer to the following for the ink type and the details.
7.4 Options/Supply list
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3-12
Advertisement
Table of Contents
