2 Product Overview
2.3 Part names and functions
Part names and functions are explained below.
2.3.1 Front
4
5
6
7
13
No.
Name
1
Operation panel
2
Main tank
3
Tank tray
4
Front cover
5
Pressurizing roller
6
Platen
7
Media guide
4
8
14
This panel is used to set operational conditions, the status of the printer, and other
functions.
Container for holding the ink and the jet wash fluid. The following are attached to the
tank tray for each.
• PJ-1614NXE: 5 bottles
• PJ-2216NXE: 7 bottles
Used to attach the main tank to the product.
This cover keeps the operator safe from the drive parts of the printer while it is
operating. Open and/or close the cover only when performing the following
operations.
• Media setting and replacement
• Clearing inside the printer
• media jamming
This roller is used to press the media from above and keep it flat when printing.
Set inside the front cover. A heater for drying ink is built in. On the surface, there is a
cutter groove for paper cutting.
This is used to feed the media smoothly when setting the media and when printing.
There is a ink drying device built in.
2-2
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
10
9
12
Function
1
11
3
2