PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3 Basic Installation
3.1 Introduction
The procedures needed before using the printer are explained below.
3.2 Connecting the power cable
The connection procedure for the power cable is explained below.
WARNING
• • • •
Make sure that the distributed power cable is used. Use of a different cable
may result in electric shock or fire.
• • • •
Do not use a damaged power cable. Doing so may result in electric shock or
fire.
CAUTION
Be careful of the following when handling the power cable.
• • • • Do not make any modifications to the power cable.
• • • • Do not place anything heavy on the power cable.
• • • • Do not bend, twist, or pull the cable.
• • • • Do not wire the cable near equipment that generates heat.
NOTE
If the power cable is damaged, contact one of the following locations.
• The shop where you bought your MUTOH printer
• Nearest MUTOH local dealer
To connect the power cable, follow the steps below.
1. Make sure that the printer is off.
3-1
3 Basic Installation