PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3.6 Media handling
The following describes the procedures for installing and setting roll media, setting types of media, and
using the take-up mechanism.
The procedures required for media installation is shown in the following flow diagram.
Refer to the following items according to the model to be used before performing the operations.
(1) For PJ-1614NXE
1. Install the roll media to the scroller.
2. Set the roll media to the product.
3. When the take-up mechanism is used, set the take-up mechanism to the roll
4. Set the media type.
(2) For PJ-2216NXE
1. Install the roll media to the scroller.
2. Set the roll media to the product.
3. When the take-up mechanism is used, set the roll medial to the take-up
4. Set the media type.
3.6.1 Attaching roll media (PJ-1614NXE)
3.6.2 Loading roll media (PJ-1614NXE)
media.
3.6.5 Setting winding unit
3.6.6 Setting media type
3.6.3 Attaching roll media (PJ-2216NXE)
3.6.4 Loading roll media (PJ-2216NXE)
mechanism.
3.6.5 Setting winding unit
3.6.6 Setting media type
↓
↓
↓
↓
↓
↓
3-17
3 Basic Installation