4 Handling the printer
4.6 Operations after printing
The operations performed after printing is described here.
4.6.1 Roll media cutting procedure
The roll media cutting procedure is described.
Cut the roll media according to the following procedure.
CAUTION
• • • •
Immediately after printing, the media guide and the platen is very hot. Perform
work after the media guide and the platen has cooled off.
(1) When "Manual" is selected in the media cut menu
1. After printing, the roll media will automatically advance to the media cut position.
• The following message is displayed on the operation panel.
2. Open the front cover.
CAUTION
• • • •
When opening/closing the front cover, be careful not to get fingers caught in the
lid.
1
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
4-52