PJ-1614NXE PJ-2216NXE OPERATION MANUAL
No.
Name
8
Foot switch
9
Valve cover
10
Maintenance cover
11
Waste fluid tank
12
Waste fluid valve
13
Stand
14
Winding unit
2.3.2 Rear section (PJ-1614NXE)
4
5
3
1
2
No.
Name
1
AC inlet
2
Interface connector
3
Foot switch connector
4
Interface slot
This switch is used to raise and lower the pressurizing roller.
This is a cover to protect the user from the internal components of the unit. It is opened
when cleaning the print head or the sub-tank, and is normally closed.
This is a cover to protect the user from the internal components of the unit. This is
opened during the following conditions:
• When turning the unit ON or OFF
• When cleaning the print head surface.
• When cleaning the print head
Inside the cover, there is a waste fluid tray to collect waste fluid from the print head.
A tank for storing waste fluids discharged from the product.
Opened when discharging waste fluid from the waste fluid tank. This is normally
closed.
This stand is used to install the printer on a surface flat floor.
Winds and collects the printed media.
6
9
The power cable plug is inserted here.
A connector to connect the centronic interface
A connector to attach the foot switch cable
The network interface board (option) attaches here.
When not using the network interface, keep the cover closed.
2-3
2 Product Overview
Function
7
Function
8
9