4 Handling the printer
4.4.7 InkDry menu
Set waiting period from the end of operation to the start of next printing to dry ink on the printed media.
Setup items
InkDryTime
4.4.8 HeadHeight menu
Set the distance (head height) from the print head face to media.
Head height can be changed to three levels according to media thickness.
Setup items
HeadHeight
4.4.9 Stiff menu
Set media sticking force to the media guide according to media stiffness.
Parameters
0 to <30 sec. > to
270 sec. to 60 min.
Parameters
<Low>
Middle
High
-
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Descriptions
Change InkDry time by operating the following keys.
• [F2] key: Increase setup value.
• [F4] key: Decrease setup value.
• [ENTER] key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
4.4.6 User media menu
Descriptions
Set when typical media thickness is used.
Set when thicker media is used.
Set when thickest media is used.
After setting, shift to the previous hierarchy menu.
4.4.6 User media menu
4-16