Table of Contents
Advertisement
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
7 Appendix
7.1 Introduction
This section explains the specifications, optional parts and supplies, installation procedures for optional
parts, and user support for this printer.
7.2 Product Specifications
7.2.1 PJ-1614NXE Unit specifications
Item
Model name
Printing method
Drive method
Media feed method
Media fixing method
Media supply and discharge
Roll paper specifications
Max. media width
Max. print width
printing margins
Media cut method
Head height adjustment
CPU
Memory
Commands
Interface
Ink
Supply method
Ink Color
Tank Capacity
Head life expectancy
PJ-1614NXE
Piezo inkjet
Firmware servo/DC motor drive
Multi-point pressure grid roller method
Pressurizing roller auto-down method
Back feeding/front paper discharge
External: 150mm(5.9in.) or less, weight 50kg(110Lbs.) or less.
1626mm(64.0in.)
1600mm(63.0in.)
Front: 100mm, Back: 0-50mm, Left: 12.7mm, Right: 12.7mm
Manual cut
Three levels: Low/Normal/High
64Bit RISC CPU,
64MB
MH-RTL (RTL-PASS)
• Standard: bi-directional centronic method (IEEE1284 compliant;
compatible, nibble, ECP mode)
• Optional: Network Interface
Pump supply method from individual color tanks to a sub-tank.
Supply from the tank to print head through ink weight using vacuum control.
Maximum 4 colors (black, cyan, magenta, yellow)
2000ml(0.52Gal.) for each color
10 billion dots or more per nozzle(in case of the sequence discharging under
the condition of the temperature 25°C(77F) with no dust)
7-1
Specifications
7 Appendix
Advertisement
Table of Contents
