Testprinting - MUTOH PJ-1614NXE User Manual

3 Basic Installation

3.8 Testprinting

Follow the steps below to do a testprinting and confirm that your printer operates correctly.
1. Turn the power of the unit ON, and set the media.
2. Make sure that your printer is in normal status.
3. Press either the [MENU
• The setup menu is diplayed.
4. Press [F2] key on the control panel.
• "TestPrint: SetupPrint" is displayed on the LCD.
5. Select an item among the following and press the appropriate key, from [F1] key to [F4] key.
Setup items
Test Print (1/2)
Test Print (2/2)
6. Print the information on the selected item.
7. After printing, the printer returns to the normal status.
] key or [MENU
Key
Parameters
name
F1 Setup
F2 Nozzle check
F3 Adj.Uni-D
F4 Adj.Bi-D
F1 Palete
F2 Mainte.
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
] key on the control panel.
Perform Setup Llist.
3.8.1 Setup List
Perform Nozzle check.
3.8.2 NozzleCheck
Perform Alignment fot the uni-direction printing.
3.8.3 Alignment
Perform Alignment fot the bi-direction printing.
3.8.3 Alignment
Perform Color Palette.
3.8.4 Color Palette
Perform Maintenance record.
3.8.5 Maintenance record
3-42
Descriptions