Table of Contents
Advertisement
3 Basic Installation
No.
1
5. Set the roll media according to the following procedures:
•
3.6.2 Loading roll media (PJ-1614NXE)
•
3.6.4 Loading roll media (PJ-2216NXE)
3.6.6 Setting media type
The procedure for setting media type is explained below.
To set the media type, follow the steps below.
1. Turn the printer on and load the media.
• After setting the media, go to the media initialization Menu.
TIP
See the following sections to load media.
3.6.2 Loading roll media (PJ-1614NXE)
3.6.4 Loading roll media (PJ-2216NXE)
2. Press the keys below in the control panel to change the settings.
• When changing the type of media: [F2] key
• When going over from media loading :[F3] key
1. Scroller
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
1
Name
3-36
Advertisement
Table of Contents
