4 Handling the printer
Setup items
media detect
TIP
•
When setup value is changed from "OFF" to "ON" in the media detection menu, go to the media initial menu.
•
3.5 Refilling the ink - jet wash fluid
4.4.41Media width menu
When media detection will not be performed during initialization of the media, the width of the media
set is set here.
They can be set in the following ranges:
• PJ-1614NXE:210mm-1626mm
• PJ-2216NXE:210mm-2210mm
NOTE
•
If the set value is larger than the media width set by the media width menu, media and product may be tainted by
ink during printing.
Setup items
media width
Parameters
<ON>
OFF
-
Parameters
• PJ-1614NXE:210mm-
<841mm>-1626mm
• PJ-2216NXE:210mm-
<841mm>-2210mm
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Descriptions
Perform media detection automatically.
After setting, shift to the previous hierarchy menu.
4.4.38 Utility menu
No media detection. When "OFF" is set, go to the Media width
setup menu.
4.4.41 Media width menu
• [CANCEL] key: Shift to the previous hierarchy menu.
4.4.38 Utility menu
Descriptions
Change media width by operating the following keys.
• [F2] key: Increase setup value.
• [F4] key: Decrease setup value.
• [ENTER] key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
4.4.38 Utility menu
4-32