Network Interface (Optional) Specifications - MUTOH PJ-1614NXE User Manual

PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Pin
Connection signal
number
12 P ERROR
13 SELECTED
14 AUTOFD
15 Not connected
16 SG
17 FG
18 +5V
(3) Recommended centronics cable specifications
Item
Interface Dual-direction Parallel Interface:IEEE1284
Structure AWG28×18 (twisted pair wiring)
Shield construction Metallic tape+weaving(double shielded cable)
Characteristic 62Ω
impedance

7.3.2 Network Interface (Optional) Specifications

Item
NetWork Type
NetWork I/F
Protocol
Mode
Functions
Signal direction
From printer→
From printer→
To printer←
Ethernet IEEE802.3
10 Base-T,100 Base-TX(automatic switching)
(RJ-45 connector,twisted pair cable,category 5)
TCP/IP
• ftp
• lpr
• socket
• Automatic protocol recognition
• Transmission speed up to 330 KB/s (differs according to networking environment)
• IP address and other settings are enabled by the accessory utility software (Printset) and
general browser software
Pin
Connection signal
number
30 SG
31 INIT
32 FAULT
33 Not connected
34 Not connected
35 Not connected
36 SELECTIN
Specifications
Specifications
NetWare(V3.1)
• remote printer mode
• print server
7-5
7 Appendix
Signal direction
To printer←
From printer→
To printer←
EtherTalk
• printer name
• zone name