Table of Contents
Advertisement
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
4.4.2 Origin setup menu
p.4-12: Modify the descriptions as follows:
Setup items
Origin setting
L: Media feed value
W: Print head movement value
(Unit: mm)
Setup items
Origin setting
Origin Position check
Confirm origin position and
push ENTER
NOTE
NOTE
The print head automatically returns after none of keys are pressed for a certain period (5 sec.) while
checking the origin position, to avoid drying the print head.
PJ16E-A-00d
Parameters
Change print head position and media feed amount
by operating the following keys.
Parameters
28
Descriptions
[F1] key: Increase setup value L.
[F2] key: Increase setup value W.
[F3] key: Decrease setup value L.
[F4] key: Decrease setup value W.
Drawing start point
X
W
[ENTER] key:
Determines the setup values.
The print head moves to drawing start point.
The following messages are displayed on the
operation panel
Descriptions
[ENTER] key:
Determines the setup values.
The print head returns as before.
The operation panel returns to the normal status.
MUTOH INDUSTRIES LTD.
ERRATA
Y
L
0
April 2002
Advertisement
Table of Contents
