Status Messages - MUTOH PJ-1614NXE User Manual

PJ-1614NXE PJ-2216NXE OPERATION MANUAL

6.3.1 Status messages

(1) Displays of the operational status (1)
p.6-8: Add the following items.
No. Display
8 No Jetwash
9 Moving Origin Pos.
(2) Displays of the operational status (2)
p.6-9: Add the following items.
No. Display
10 Jetwash discharge
Wait for a while
11 Jetwash injecting
Wait for a while
12 Ink supplying
Wait for a while
13 Power Off
Please wait
14 *CapCover Set*
Put CapCover on
and push ENTER
15 *Origin Pos. Check*
Confirm Position
and push ENTER
16 ***** Warning *****
There is old parts
Check Maintenance
17 *Purge End*
Print -> CANCEL
Purge -> ENTER
PJ16E-A-00d
Solutions
Refill the jetwash fluid.
The Print head is returning to the origin
position of the origin setting process.
Solutions
The jetwash fluid is being discharged the
jet wash fluid for the cleaning process of
the log-term storage Please wait.
The jetwash fluid is being injected the jet
wash fluid for the cleaning process of the
log-term storage Please wait.
The ink is being supplied to eh print head
for the power OFF process. Please wait.
The ink is being discharged into the print
head cap for the power OFF process. Please
wait.
The print head cap is removed.
Install the print head cap, and press the
[ENTER] key.
Press [ENTER] key to determine the setup
values of the origin setup menu.
There is the part that becomes end of the
life cycle.
Check the maintenance record menu.
Exchange the parts shown in the
maintenance record.
The Purge process during printing is
completed. Press the following keys on the
operation panel.
When restart printing: [CANCEL]key.
When continue purging: [ENTER] key
43
ERRATA
References
5.2.1 Refilling the ink
and jet wash liquid
References
5.4 Long term
storage cleaning
5.4 Long term
storage cleaning
3.4.2 Turning the
power OFF
3.4.2 Turning the
power OFF
3.4.2 Turning the
power OFF
4.4.2 Origin setup
menu
5.2.4 Replacement of
the print head and CR
motor
3.7 Head cleaning
before printing
April 2002
MUTOH INDUSTRIES LTD.