Head Cleaning - MUTOH PJ-1614NXE User Manual

PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3. Press the [F1] key or the [F2] key on the control panel
• The unit will perform the following operations:
Key name
[F1] key
[F2] key
NOTE
•
If "OFF" is selected in the winding unit setup menu, the winding unit will not operate even if the key is pressed.

4.5.4 Head cleaning

If the printed screen is smeared or misprinted, perform cleaning of the print head surface and the nozzles
(head cleaning).
Perform head cleaning according to the following procedures.
1. Verify that the product is at a normal status.
2. Follow "3.8 Testprinting", and perform nozzle check printing
3. Refer to the illustration below to verify the condition of the print head.
Operation when the key is pressed.
• The winding direction rotates in the advance direction
• The roll media will be wound up by the winding unit.
• The winding unit rotates in the reverse direction
• The roll media will be unrolled back out of the winding unit.
4-49
4 Handling the printer