Table of Contents
Advertisement
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3.6.6 Setting media type
p.3-36 p.3-37: Modify Step 2 as follows.
2. Press the keys below in the control panel to change the settings.
When changing the type of media: [F2] key
When going over from media loading: [F3] key
When changing the setting of winding unit (PJ-2216NXE only): [F4] key
Setup items
name
Media type
F2
Lever Up/Down
F3
Send Out/In
F4
NOTE
NOTE
Problems that occur due to usage of media such as printable side with inside, are not guaranteed.
PJ16E-A-00d
Key
Parameters
User 1
User 2
User 3
User 4
User 5
User 6
User 7
User 8
Lever Up
Lever Down
Send Out
Send In
Set media type for printing.
For setup values of printing operation, eight settings
of "user 1 8" can be set.
4.4 Menu setup on the operation panel
Switches between up and down motion of the
pressurizing lever. Use this when starting over from
the media setup.
Set feed unit operation during printing.
Send Out: Set when using the roll media such as the
printable side is outside
Send In: Set when using the roll media such as the
printable side is inside
21
Descriptions
April 2002
MUTOH INDUSTRIES LTD.
ERRATA
Advertisement
Table of Contents
