Table of Contents
Advertisement
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
NOTE
•
If there are any problems during the initial startup operation, the unit will display a message on the control panel, and
the operation may stop.
If the operation stops, refer to "6. Troubleshooting", and take the appropriate measures.
3.4.2 Turning the power OFF
Turn the power of the unit OFF according to the following procedure.
1. Verify the following regarding the operational condition of the unit.
• There is no printing operation being performed.
• The Control panel is in a normal status.
2. Push the [POWER] key of the control panel, to turn the unit OFF.
NOTE
•
The power is ON if the control panel displays the following conditions:
• The [POWER] key is in the pushed in condition
• The POWER lamp is lit (red).
Press the [POWER] key again to turn the power OFF.
3. The product will perform the power OFF operation.
• When the power OFF operation is complete, the POWER lamp of the control panel will turn off.
• The product will automatically turn the power OFF.
4. Open the front cover and the maintenance cover.
CAUTION
• • • •
When opening/closing the maintenance cover, be careful not to get fingers
caught in the lid.
F 1
F 3
ERROR
DATA
RECEIVE
MENU
PROCESS
MEDIA SET
CANCEL
ENTER
3-9
F 2
F 4
POWER
3 Basic Installation
Advertisement
Table of Contents
