Table of Contents
Advertisement
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3.4.2 Turning the power OFF
p.3-9 p.3-11 Modify the procedures as follows:
1. Follow "3.8 Test printing", and perform nozzle check printing.
2. Verify if there is any clogging of nozzles, missing dots, or faint printing.
NOTE
NOTE
If printing quality declines, or if missing dots are evident after the nozzle check, the print heads need
to be cleaned.
See "4.5.4 Head cleaning" to perform head cleaning.
If turning the power OFF without head cleaning, the clogged nozzle may not restore.
3. Verify the following regarding the operational condition of the product.
There is no printing operation being performed.
The control panel is in a normal status.
4. Push the [POWER] key of the control panel, to turn the product OFF
NOTE
NOTE
The power is ON if the control panel displays the following conditions:
The [POWER] key is in the pushed-in condition.
The POWER lamp is lit (red)
Press the [POWER] key again to turn the power OFF.
5. The product will perform the power OFF operation.
Following message is displayed on the operation panel.
PJ16E-A-00d
F 1
F 3
ERROR
DATA
RECEIVE
MENU
PROCESS
MEDIA SET
CANCEL
ENTER
7
F 2
F 4
POWER
MUTOH INDUSTRIES LTD.
ERRATA
April 2002
Advertisement
Table of Contents
