2 Product Overview
No.
Position
1
1st line
2
Left of 2nd line
3
Right of 2nd line
4
Left of 3rd line
5
Right of 3rd line
6
4th line
TIP
•
By using the software server RIP, some setups for plotting can be set by the RIP.
For details, refer to the operation manual of the products.
2.4.3 Changing the printer status
To change the printer status, follow the steps below.
(1) Changing the status from normal to the setup menu display
Press either [MENU
• The display of the control panel changes to the setup menu display.
NOTE
•
See "4.4 Menu setup on the operation panel" for details of the setup menu.
(2) Changing the status from the setup menu display to normal
Take one of the following actions when the printer is in the setup menu display to change the operation
panel display to normal one.
• Press the [CANCEL] key on the operation panel.
• Leave the printer as it is for 3 minutes when the status is in the setup menu display.
Displays the setup menu name set currently.
Displays the function assigned to [F1] key.
Displays the function assigned to [F2] key.
Displays the function assigned to [F3] key.
Displays the function assigned to [F4] key.
• Displays the currently available functions of [F1] key to [F4] key.
• Displays the page status if there are multiple pages for the currently displayed setup
menu.
• Displays the parameter that is currently set.
] key or [MENU
] key on the control panel when the printer is in normal status.
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Description
2-8