Media Feed Compensation - MUTOH PJ-1614NXE User Manual

PJ-1614NXE PJ-2216NXE OPERATION MANUAL
No. Evaluation Item
11 Damage, wrinkle, stain,
foreign materials on media
12 Cardboard core I.D.
13 Curl
14 Scuffing

4.3.6 Media feed compensation

Depending on thickness of media, media feed amount will change. Printing results may show following
symptoms.
• Overlapped printing images
• White lines on printing image, etc
For above cases, adjust media feed compensation value with following procedures.
1. Display Media feed compensation menu on the operation panel by following "4.4Menu setup on the
operation panel".
2. Push [F2] key on the operation panel to perform printing by media feed compensation.
• The following messages are displayed on the operation panel.
4.4.15 Printing by Media feed compensation menu
3. Confirm printing result by referring the following figure.
Evaluation Method
Confirm media visually.
Confirm media visually.
Confirm media visually.
Confirm media visually.
4-7
4 Handling the printer
Criteria
No damage, wrinkle, stain, and
foreign materials on media.
• Full insertion of scroller to media
flange.
• No slipping
• No float by the curl when sticking
media to the media guide.
• No friction with the print head
nozzle during printing.
No scuffing on media surface.