Printer Maintenance; Head Cleaning - MUTOH XPJ-461UF Operation Manual

Printer Maintenance

3

Printer Maintenance

Head cleaning

When nozzle clogging is found in nozzle check, conduct head cleaning. Head cleaning consumes ink.
There are several cleaning modes in this product. Please select an appropriate mode based on your usage condition.
Short cleaning
Normal cleaning
Long cleaning
Little Charge
Initial Charge
Important!
Comply strictly with the following when you performing "Little Charge" or "Initial Charge". If charging is interrupted, ink will be
lost when charging is resumed.
• Do not open the Front cover or the PG handle cover.
• Do not use ink cartridges that have little ink remaining.
Consumes less ink than Normal cleaning.
Perform Normal cleaning if nozzle clogging is found on the nozzle check print.
Perform Long cleaning if nozzle clogging still persists after performing Normal cleaning.
It consumes more ink than Normal cleaning.
Provide higher cleaning effect than Long cleaning, but it also consumes more ink.
*This mode cannot be selected via the
Setting Menus.
"Maitenance1: Cleaning" P. 90
Provide higher cleaning effect than Little Charge, but it also consumes more ink.
*This mode cannot be selected via the
Setting Menus.
"Maitenance1: Cleaning" P. 90
. Select it from the Cleaning submenu in the Panel
. Select it from the Cleaning submenu in the Panel

Head cleaning

123