PJ-1614NXE PJ-2216NXE OPERATION MANUAL
5.2.2 Replacing roll media
Read the following for information on when and how to replace roll media.
(1) Replacement time
Replace roll media under the following conditions.
a. When the roll media loaded in the printer comes to an end
• The following message is displayed on the operation panel.
• If the media comes to an end while printing, the printer stops printing.
b. When you want to change the type of media
(2) Types
TIP
For types and details of roll media, refer to the following.
7.4 Options/Supply list
(3) Replacement procedure (PJ-1614NXE)
Follow the steps below to replace roll media.
1. If the printer is turned on, make sure of the following
• Printing or other operations are not performed.
• Make sure that the display on the operation panel shows the normal state.
• Make sure that the MEDIA SET lamp is lit (green) on the operation panel.
CAUTION
Be sure not to pinch your fingers while opening and closing the front cover.
2. Open the front cover.
5-3
5 Maintenance