PJ-1614NXE PJ-2216NXE OPERATION MANUAL
3.6.5 Setting winding unit
p.3-34: Add
NOTE
NOTE
NOTE
NOTE
When using the winding unit, always load the media before printing.
p.3-34: Add
NOTE
NOTE
NOTE
NOTE
When using the winding unit, Always use the media tube attached to the product..
p.3-35: Add
NOTE
NOTE
NOTE
NOTE
When setting the roll media to the winding unit,
Check the front and back of the product and make sure the media is free of wrinkles or slack.
Install the media on the media tube so that the printing side faces outside. The media cannot be
wound if the printable side faces inside.
Front section
Rear section
PJ16E-A-00d
in front of the procedure.
to Step 1
to Step 3
20
ERRATA
April 2002
MUTOH INDUSTRIES LTD.