PJ-1614NXE PJ-2216NXE OPERATION MANUAL
4.4.42Take-up mechanism menu
Set take-up mechanism operation during printing.
Setup items
Winding unit
4.4.43Negative pressure pump menu
The operational pressure of the vacuum pump is set here.
Setup items
Vacuum pump
4.4.44File management setup menu
Makes various settings for the processing method of the printing data sent from a computer to the
installed hard disk in the printer.
NOTE
•
File management menu items can be set when the hard disk (option) is installed on the product.
Parameters
<OFF>
ON
-
Parameters
-3.0kPa-<-2.1kPa>--1.5kPa
Descriptions
No use of take-up mechanism.
Use take-up mechanism.
After setting, shift to the previous hierarchy menu.
4.4.38 Utility menu
Descriptions
Change operating pressure of negative pressure pump by
operating the following keys.
• [F2] key: Increase setup value.
• [F4] key: Decrease setup value.
• [ENTER] key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
4.4.38 Utility menu
4-33
4 Handling the printer