Head Cleaning - MUTOH ValueJet VJ-1626UH Operation Manual

VJ-1626UH OPERATION MANUAL 6 Maintenance
6.5.3

Head cleaning

If printed data is blurred or lacks part of it, clean the print head surface and nozzle (Head cleaning).
Follow the procedure below to perform Head cleaning.
NOTE
• Remove media when cleaning.
Cleaning with media loaded may lead to contact between the print head and media.
1. Confirm that the operation panel is Normal.
2. Make sure that Front media loading lever is lowered (Rear media loading lever is raised).
3. Press the [>] key on the operation panel to select the cleaning mode.
Short mode Normal mode Long mode
6.5 Cleaning the printer 287