PJ-1614NXE PJ-2216NXE OPERATION MANUAL
No.
1
3. If a piece of media or media dust are in the printer, open the front cover and remove the media or
media dust.
1
4. If an error requiring a restart has occurred, turn off the power of the product once, and turn it on
again.
6.4.2 How to remove the media (PJ-2216NXE)
CAUTION
Be sure not to pinch your fingers when you open or close the front cover.
1. Press [F2] key to raise the pressurizing roller.
• The MEDIA SET lamp goes off.
• The following message is displayed on the operation panel.
Scroller
Name
6-15
6 Troubleshooting
1