Table of Contents
Advertisement
3 Basic Installation
3.9.3 Connecting the interface cable
The procedure for connecting the interface cable is explained below.
To connect the printer to your computer, follow the steps below.
1. Turn the printer and your computer off.
2. Plug the cable connector of the interface cable into the interface connector on the back of the printer.
Squeeze the wire clips together until they lock into place.
No.
1
2
3. Plug the other end of the cable into the computer's port.
TIP
•
See your computer's manual for the procedure for connecting to the computer.
•
You can use your printer on a network using a network interface board (optional).
When connecting the board, see "7.5.2 Installing network interface board" for details.
•
For types and details of the network interface board (optional), refer to the following.
7.4 Options/Supply list
Centronics interface connector
Interface cable
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Name
3-50
Advertisement
Table of Contents
