3 Basic Installation
10. Close the front cover.
CAUTION
• • • •
Be careful not to pinch your fingers when opening and closing the front cover.
NOTE
•
If you load a new tube of roll media, the media end may not be straight. If so, cut the end of the roll media. See "4.6.1
Roll media cutting procedure" to cut the roll media.
1
No.
1
11. The media initial menu is displayed on the control panel.
TIP
•
When changing the media type, follow "3.6.6 Setting media type" and set the type of media.
3.6.3 Attaching roll media (PJ-2216NXE)
The procedure for attaching roll media to the printer is explained below.
To attach roll media, use the scroller that comes with your printer.
Front cover
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Name
3-26