PJ-1614NXE PJ-2216NXE OPERATION MANUAL
TIP
•
During the factory shipping inspection, in order to perform verification of printing operations, ink is passed
through the ink routing of the unit once, so there will be some coloration of the ink passages, waste fluid tubes
and filters.
Refill the ink and jet wash fluid of the unit according to the following procedure:
1. Open the lid of the main tank.
No.
1
2. Hold the ink supply bottleupside-down 2 or 3 time, without letting the ink bubble in the bottle.
3. Place the funnel into the main tank, and refill the main tank with the ink or jet wash liquid from the
supply ink bottle.
CAUTION
• • • •
The refilled ink or jet wash liquid must not exceed the upper limit (about 2 liters)
of the main tank. If it exceeds the upper limit, the ink will leak out and cause
printer problems.
• • • •
When filling the main tank with ink, make sure not to make a mistake with the ink
color and the ink tube colors. Filling the tank with wrong color ink can make the
print head useless.
Main tank
Name
3-13
3 Basic Installation
1