Table of Contents
Advertisement
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
4.4.6 User media menu
p.4-15: Modify the descriptions as follows:
Setup items
User media 1 8 (1/2)
User media 1 8 (2/2)
User media 1 8 (1/2
2/2)
PJ16E-A-00d
Parameters
Ink Dry Timer
Height
Stiffness
Thick
Heater
Dryer
Paper Close
Dist.Adj
30
Descriptions
In order to let the ink for the printing dry, the wait
time from the time of work end to the next printing
is set here.
4.4.7 Ink Dry menu
Set the distance (head height) from print head face
to media.
4.4.8 Head Height menu
Makes the setting for the absorbing power of the
media to the printing board depending on the
hardness of the media.
4.4.9 Stiff menu
Makes the setting on the width of the media to be used.
4.4.10 Thickness menu
The platen heater temperature during printing is set.
4.4.11 Platen heater menu
The ink dryer temperature during printing is set.
4.4.12 Dryer menu
Sets the winding operation of the winding unit.
4.4.64 Winding Unit Menu(Refer to sheet 32)
Perform various settings for media feed compensation.
4.4.13 Media feed compensation menu
[CANCEL] key: Shift to the previous hierarchy menu.
4.4.5 Media type menu (Refer to sheet 29)
MUTOH INDUSTRIES LTD.
ERRATA
April 2002
Advertisement
Table of Contents
