Table of Contents
Advertisement
3 Basic Installation
CAUTION
• • • •
When performing the following work, always perform work with 2 people.
• • • • Placement of the roll media
• • • • Setting of the roll media
• • • • Setting of the winding unit
3.6.1 Attaching roll media (PJ-1614NXE)
The procedure for attaching roll media to the printer is explained below.
To attach roll media, use the scroller that comes with your printer.
NOTE
•
The following roll media can be attached to the scroller supplied with this unit.
• Diameter of the cardboard core : 2 inches (External diameter :150mm or less, weight: 50kg or less) or Diameter
of the cardboard core: 3 inches (External diameter: 150mm or less, weight: 50kg or less)
• The printable side of the roll media must be on the outside.
To attach roll media, follow the steps below.
1. Loosen the screw for the movable flange, and remove from the scroller.
No.
1
2
2. When using a roll media with a media tube diameter of 2 inches, remove the movable flange and the
fixed flange adapter.
No.
1
Scroller
Movable flange
Movable flange
PJ-1614NXE PJ-2216NXE OPERATION MANUAL
Name
Name
3-18
Advertisement
Table of Contents
