Rotate - Rotating The Coordinate Axes - GRAPHTEC FC4100 series User Manual

ROTATE - Rotating the Coordinate Axes

This function is used to move the origin and rotate the coordinate axes by 90° as shown in the
figure below.
Press the MENU key to select MENU mode.
Press the NEXT key.
Press the NEXT key again.
Press the F3 key to select FUNCTION1.
Press the F2 key to select ROTATE.
Press the F3 key to turn ON the function .
Press the F4 key to turn OFF the function.
Press the ENTER key to register your settings.
Press the MENU key to cancel MENU mode.
When the ROTATE mode is selected or canceled, the displacement of the new origin remains
valid in the "a" direction, but is reset to its default position in the "b" direction.
Advanced Functions and Settings ♦ C4 - 17
INTERFACE >
AREA PARAMETERS>
FUNCTION 1>
FUNCTION 2>
ROTATE>
MIRROR>
SCALE>
ROTATE
ON\ \
OFF