Chapter 5 Background Settings - GRAPHTEC FC4100 series User Manual

Chapter 5 Background Settings

This chapter discusses your plotter's background settings.
NOTE: Your settings are registered in the plotter's internal memory and retained even when
the plotter is turned off.
To access this menu, turn on the plotter while pressing the DOWN ARROW key. After setting the
necessary items, turn off the plotter regardless of the menu being displayed. All settings are
registered in the plotter's internal memory and retained even when the plotter is turned off.
There are two different menu sequences. Each of them belongs to GP-GL and HP-GL
commands.
This menu sequence comes up if GP-GL is selected as the
plotter's data command.
This menu sequence comes up if HP-GL is selected as the
plotter's data command.
Background Settings ♦ C5 - 1
V 1.12 GL
V 1.12 HL