GRAPHTEC FC4100 series User Manual page 66

The number can be increased up to the maximum number of copies that can be cut out of the
currently loaded media.
You may re-load another larger media to achieve the number the copies you wish to cut. Then
reset the copy function again.
Press the ENTER key, the following menu will appear.
The plotter starts cutting/plotting as soon as the ENTER key is pressed.
If you wish to continue cutting more copies, reload the media and start over again from pressing
the COPY key.
NOTE: If there is an interval of 10 seconds or greater when the data is sent, the previous data
is cleared.
Advanced Functions and Settings ♦ C4 - 4
CONDITION 2 14
30
COPY 4
CB09Ux 0