Enabling The Rotate Mode To Rotate The Coordinate Axes - GRAPHTEC FC4200-50 User Manual

6.3 Enabling the ROTATE Mode to Rotate the Coordinate Axes

The ROTATE function selects the ON/OFF status of the ROTATE mode. Set the ROTATE mode to ON in
order to rotate the coordinate system of an image as shown in the example below.
Rotated origin point
Y
X
When ROTATE mode is ON
Y
When ROTATE mode is OFF
X
Original origin
Setting Procedure
(1) Press the PAUSE key, then press the
FORCE
F1
MARK
CLEAR
F2
SPEED
(2) Press the NEXT PAGE key until the menu below appears.
FORCE
F1
INTERFACE FUNCTION
FILM
F2
SPEED
(3) Press the (FUNCTION) key to display the menu below.
F3
FORCE
F1
ROTATE
THICK
F2
SPEED
(4) Press the (ROTATE) key to display the menu below.
F1
FORCE
F1
ON
F2
SPEED
Rotated coordinate axes
Original direction of coordinate axes
OFFSET
PEN U/D
SELECT PEN
QUALITY
OFFSET
PEN WIDTH
QUALITY
OFFSET
MIRROR
SORT
QUALITY
OFFSET
ROTATE
OFF *
QUALITY
NEXT PAGE key until the menu below appears.
F3
F4
F3
F4
F3
F4
F3
F4
6 – 4