GRAPHTEC FC4100 series User Manual page 157

4. Install one Basket Tube thru the top two holes of
the Tube Brackets front and rear.
5. Install the remaining Basket Tube thru the bottom
two holes of the Tube Brackets rear and front.
6. Push the two Basket Tubes in all the way.
7. Install the Tube Stoppers into the end of the Tubes; use
a Mallet or Rubber Hammer if necessary to tap in the
stoppers.
NOTE: Do not pull out the tube during operation and
dislodge the caps.
Options ♦ C9 - 9