GRAPHTEC FC4100 series User Manual page 81

If CONTENU is selected, the MEDIA TYPE MENU then appears.
Select the media type you wish to use.
Press the F1 key to select ROLL-1.
Press the F2 key to select ROLL-2.
Press the F3 key to select SHEET.
The following menu appear .
The plotter begins sorting immediately when it receives the cut
data from the PC.
If CANCEL is selected, return to the previous menu .
Press the MENU key to cancel the menu mode.
NOTE: The plotter begins sorting immediately when it receives the cut data from the PC,
however, the cutting/plotting may experience a delay due to the data sorting process.
While the plotter is data sorting, following key operations become invalid.
Direct keys: COPY, ORIGIN, AXIS ALIGNMENT, CONDITION
F KEYS TO SELECTING CONDITION NUMBER
Menu mode: All the functions except for PEN UP/DOWN,
NOTE: Your data sorting setting is retained in the plotter's internal memory even while the
plotter is turned off.
Advanced Functions and Settings ♦ C4 - 19
BUFFER CLEAR and FEED
ROLL-1>
ROLL-2>
SHEET>
CINTINUE>
CONDITION 2 14
30
SORTING 4
CB09UX 0
DATA SORTING>
AXIS ALIGNMENT>
AUTO PRE FEED>
TANGENT EMULATION>